Your subscriber status is pending, please check back in a few minutes. 

Something went wrong, please contact us or call (360)-539-746. 

FREE Shipping On All Orders Over $25!

Most orders shipped out same-day!

Learn More

The Phoenix Mission

We Want To Help A Million People

Read More

Wholesale Portal

Amazing Wholesale Prices For Your Business

click here
Vaporous RDA by Wotofo
Vaporous RDA by Wotofo
Vaporous RDA by Wotofo
Vaporous RDA by Wotofo Vaporous RDA by Wotofo Vaporous RDA by Wotofo

Vaporous RDA by Wotofo

Less than 5 left - Order soon!
Low Stock Alert
Add to cart

Add to cart

This prestigious RDA features dual-post with a 4 hole design and clamps (you can use the post holes, just the clamps or both) allowing you to make several different coil configurations for a massive coil builds... even quad coils are easy to build and install on this RDA! The Vaporous RDA is 24mm in diameter so it would fit almost all mods without hanging over. This RDA includes spare parts and coils in the box so you can keep on vaping. But one of the coolest features of the Vaporous is the option to use either the standard 510 connection pin or the Squonk pin (included in the box)! To top it off, it has a 24K Gold-Plated connection to serve better conduction to your coil.  The Vaporous RDA is certainly a great atomizer, and, with all the customization options available, is sure to fit any vaper’s profile.

NOTE: For advanced users only, be familiar with Ohms law before use. Squonk pin can only be used with Squonk mod.

Features:

  • Dual-Post, 4 Hole Deck with Multiple Coil Building Types
  • Wide Bore Tip
  • Delrin Tip
  • Squonk Pin (Included)

Specifications:

  • 24mm diameter
  • 510 thread
  • Dimensions: 22x22x30mm
  • 316 Stainless Steel

What’s In The Box:

  • (1) The Vaporous RDA
  • (1) Japanese  cotton
  • (3)  NiChrome 80 Clapton coils*
  • (1) Bag of Spare Parts (Squonk Pin included)
  • (1) Multifunction Wrench
  • User Manual

Dave's Tips: When building on this post-less RDA ensure you do not over tighten the screws. Over tightening of the screws may cause them to strip, or get stuck inside the RDA deck. When building I found roughly 3 mm of space between the coil and the deck yields the best flavor and vapor production.

* Phoenix Vapor does not recommend the use of NiChrome as heating this metal above 600 degrees Fahrenheit can cause it to release toxic gasses or fumes.